High-precision power hollow chucks type PPM

Description

Chucks are designed for clamping workpieces machined on lathes of “B” accuracy class in producing multiple units.

A motorized drive mounted on a back spindle terminus of a machine starts a chuck.

Adjustment of a required clamping diameter is performed by remounting of hardened top jaws to base jaws riffling, in this case required chuck accuracy remains. A chuck is available with grease lubricators for lubricating working surfaces of a chuck. The advantage of a chuck is that it has a through-hole which allows machining workpieces by passing them through the machine spindle. Chucks are interchangeable with the chucks produced by leading European manufacturers (SMW-AutoBlok, Schunk, etc ) and Asian manufacturers (KITAGAWA, AUTO Strong, etc.).

Standard equipment:

  1. a chuck with soft jaws;
  2. mounting wrench for mounting a chuck on a machine and for readjustment of top jaws;
  3. mounting screws.

Ordering example: a power hollow chuck, outer diameter 210 мм, through-hole 52 mm with adapting flange (mounting type A6) and jaws serration pitch 1/16’’х 90°: PPM-210.52D/А6.

A set of hardened jaws is available at an additional cost.

Dimensions and specifications

Model/Chuck diameter, mmThrough-hole, mmPlunger stroke, mmJaw stroke, mmClamping surface diameters*, mmMax draw pull transmitted by a drive, kNMax gripping force of top jaws, kNAdmissible rotating speed of a chuck, min-1Weight*, not more than, kg
PPM-170.46/17045143,512-2102560600014
PPM-210.52/21052174,514-23538100500022
PPM-250.66/25066215,520-27550120400034
PPM-315.95/31595215,540-35060150320045
PPM-400.118/40011827752-45070190250090
* Diameter range of the surface clamped by jaws (come with the equipment); Chuck weight including hardened top jaws.

Parameter name PPM-170.45D PPM-210.52D PPM-250.66D PPM-315.95D PPM-400.118D
PPM-170.45М PPM-210.52М PPM-250.66М PPM-315.95М PPM-400.118М
Mounting type* D140 A5 D170 A6 D220 A6 A8 D300 A8 A11 D300 A11
A mm 170 210 250 315 400
D mm 140 82,6 170 106 220 106 140 300 140 197 300 197
l mm 5 - 5 - 5 - - 5 - - 5 -
D0 mm 45 52 66 95 118
C mm 104,8 133,4 171 - 171 235 - 235 235
CA mm - - - - - 133 - - 171 - - -
d mm 11 13 17 13 17 17 21 21
H mm 77 92 105 111 128
HA mm - 87 - 104 - 124 119 - 136 127 - 143
E mm 47 64 77,5 91 115
M* mm М55х2 М60х1,5 M72х1,5 М102х2 М130х2
On request it is possible to produce a different thread size.
Q mm 60 67 78 111 143
z* D inch 1/16’’х90° 1/16’’х90° 1/16’’х90° 1/16’’х90° 3/32’’х90°
М mm 1,5х60° 1,5х60° 1,5х60° 1,5х60° 1,5х60°
g mm 17 19 20 23 34
K mm 14 17 21 21 27
B mm 35 40 45 45 60
b D mm 14 17 21 21 25,5
М mm 12 14 16 21 22
m D mm М10 М12 М16 М16 М20
М mm М10 М12 М12 М16 М20
i mm 3 3 4 4 5
j mm 3,5 4 4,5 4,5 4,5
S D mm 16,5 23 30 34 34
М mm 20 25
r mm M8 M8 M10 M10 M12

 

*z – jaws serration pitch; mounting type: D (DIN 6353); A (GOST 12595; DIN 55026; ISO 702-1); M – further thread sizes are possible to manufacture on request (according to your specifications).

Make a
request

Submit your application

Message