Description
Lathe chucks with four independent jaws comply with GOST Standard 3890 and are designed for clamping and machining bar stock and irregularly shaped, non-symmetric, eccentric workpieces (castings, forgings, fittings, etc.) on lathes.
The steel case of chucks has T-shaped slots 22h12 GOST 1574 for installation of various technological adjustments.
Cartridges are made of the following types:
1-mounting on the flanged end of the spindle according to GOST 12595; ISO 702-1 (A8; A11);
2-mounting on the flanged end of the spindle according to GOST 12593; ISO 702-3 (J8; J11);
3-mounting on the flanged end of the spindle according to GOST 26651; ISO 702-2 (D8; D11);
4-mounting through the intermediate flange GOST 3890 (C270) on the machine spindle.
At the request of the consumer, it is possible to manufacture a Chuck for mounting through an intermediate flange DIN 6350 (C420) on the machine spindle.
For performance cartridges are manufactured with one-piece and modular Cams (-01).
Order examples:
Chuck with mounting flange end of spindle according to GOST 12595; ISO 702-1, the conditional size of a cone №8 with solid jaws – 7103-500.A8;
Chuck with mounting flange end of the spindle GOST 12593; ISO 702-3, the conditional size of a cone №11 with built-up jaws – 7103-500.J11-01.
Chuck fixation type | / | A | B | C | E | H | h | nxd | L | M | J | N | b | S | Chuck weight, kg |
А8 | / | 500 | 139,719 | 171,4 | 130 | 105 | 96 | 4x18 | 99 | 135 | 58 | 145 | 45 | 17 | 150 |
А11 | / | 500 | 196,869 | 235 | 180 | 105 | 96 | 8x22 | 99 | 135 | 58 | 145 | 45 | 17 | 140 |
J8 | / | 500 | 139,719 | 171,4 | 130 | 105 | 96 | 4xM16 | 99 | 135 | 58 | 145 | 45 | 17 | 150 |
J11 | / | 500 | 196,869 | 235 | 180 | 105 | 96 | 6xM20 | 99 | 135 | 58 | 145 | 45 | 17 | 140 |
D8 | / | 500 | 139,719 | 171,4 | 130 | 105 | 96 | 6xM20x1,5 | 99 | 135 | 58 | 145 | 45 | 17 | 150 |
D11 | / | 500 | 196,869 | 235 | 180 | 105 | 96 | 6xM22x1,5 | 99 | 135 | 58 | 145 | 45 | 17 | 140 |
C270 | / | 500 | 270х12 | 235 | 180 | 105 | 95 | 4x22 | 99 | 135 | 58 | 145 | 45 | 17 | 135 |
Parameter | Value |
The total clamping force in the jaws, кН | 135 |
Maximum torque on the key, Нм | 240 |
Maximum speed of rotation, min-1 | 750 |
Gripping range, mm | 35-500 |
The maximum extension of jaws, mm | 580 |
Сompliance of four-jaw chucks Ø500 mm.
Chucks according to GOST 3890-82 |
Chucks according to TU BY 200167257.091-2009 correspond to GOST 3890-82 (new designation) |
7103-0052 | 7103-500.J8 |
7103-0014 | 7103-500.J11 |
7103-0021 | 7103-500.С270 |
7103-0060 | 7103-500.А8 |
7103-0006 | 7103-500.А11 |